AS1851 Sect 2 Sprinklers&MJC test FTS123

Fire sprinkler, suppression, maintenance, sprinkler
Services
CSIRO will conduct testing of fire protection systems and equipment to CSIRO Test Specification FTS-123 (in accordance with AS 1851.2-2012) on Materials provided by you.
Deliverables
CSIRO will provide you with a written report of the results of the Services which will describe the test method, test as carried out, observations, the data obtained, results and conclusions.
Application
  1. The Deliverables may only be used for your internal business purposes.
  2. Deliverables must not be used in advertising or endorsements, for the purposes of dispute resolution, or in connection with a prospectus or capital raising.
  3. If the Services are to verify that the Materials conform to a standard published by a recognised standards body (the “Standard”) and the Services verify such conformity, then you may use the Deliverables to demonstrate conformity with the Standard to other people, provided that:
    i) any statement you make regarding the results of the Services clearly sets out the results and identifies the relevant Standard; and
    ii) you reproduce or provide access to the Deliverables in full.
Materials (Specimen Requirements)
This section contains detailed information of the materials you are required to provide CSIRO to allow performance of these services.
Materials
You will provide CSIRO with one sprinkler head for each test ordered. These are to be removed from the installed site and delivered to CSIRO. Note a minimum of ten (10) heads in a single batch is required to perform FTS 123.
Material Details
Number of Specimens: 1
For this test procedure, the submitted heads are segmented into groups and subject to differing tests under FTS123. Accordingly, a minimum batch size of 10 heads is required. For larger quantities, simply order the requisite number, or contact test officer for details.
Dangerous Goods Information
Please supply Safety Data Sheets for submitted specimens. If specimens contain dangerous substances, please discuss details with CSIRO's technical Contact prior to submission.
Return Instructions
The tests are destructive. Unless otherwise agreed, CSIRO will dispose of the Materials upon completion of testing
Location
Testing performed at the following location:
CSIRO - Infrastructure Technologies, CSIRO Store, Gate 3 Normanby Road, Clayton, VIC 3168, Australia.
Delivery Instructions
Deliver to: CSIRO - Infrastructure Technologies, CSIRO Store, Gate 3 Normanby Road, Clayton, VIC 3168, Australia.
Attn Technical Contact: Christopher Preston (Services, Clayton North)
Contact e-mail: Christopher.Preston@csiro.au
Contact phone: +610395452557
Fee (AUD)

The fee listed is in Australian Dollars and excludes GST.

Additional Expenses

The Fee is based upon successful product evaluation and verification. Any additional work required due to failures, product modifications, meetings and consultations will incur an additional fee which CSIRO will advise you in writing. CSIRO will obtain your authorisation prior to any re-evaluation or additional work. Any fees incurred in the return of samples will be met by you.

Payment Terms

The Fee will be invoiced on the Start Date. Any Additional Expenses will be invoiced when incurred.

NATA Accredited